hicool@hicoolac.com

English
HICOOL  >  AI - Page Sitemap  >  HICOOL quality inline duct exhaust fan best manufacturer for hot- dry areas
HICOOL quality inline duct exhaust fan best manufacturer for hot- dry areas

HICOOL quality inline duct exhaust fan best manufacturer for hot- dry areas
  • HICOOL quality inline duct exhaust fan best manufacturer for hot- dry areas
  • HICOOL quality inline duct exhaust fan best manufacturer for hot- dry areas

HICOOL quality inline duct exhaust fan best manufacturer for hot- dry areas

The product has good electromagnetic compatibility. Its conductors' width in the circuit board will be arranged reasonably, which helps reduce the interference caused by the transient current. Hicool's opticlimate packaged unit achieves more stable and efficient performance
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. The raw materials of HICOOL are procured from our trusted vendors. Opticlimate two-stage evaporation system has full functions including air exchanging and dedusting
2. With rich experience in outer packing, inline duct exhaust fan will be well protected and no damage will happen. Quiet water-cooled air conditioning is provided by Hicool's opticlimate packaged unit
3. The product has good electromagnetic compatibility. Its conductors' width in the circuit board will be arranged reasonably, which helps reduce the interference caused by the transient current. Hicool's opticlimate packaged unit achieves more stable and efficient performance
4. This product does not pose any safety hazard. It is tested by high voltage insulation and overcurrent test to prove its safety. Hicool's opticlimate packaged unit helps save power by 40% by using plate exchange technology
5. The product is able to operate in a stable manner. It is not easy to overheat or overload during its operation. Hicool's opticlimate split unit is friendly to users as it is easy to operate

OP-farm UHF-1000W2-400


HICOOL quality inline duct exhaust fan best manufacturer for hot- dry areas-1
Product characteristics

Special electronic ballast set for plant lighting, high reliability and stable circuit
Using 100KHz High Frequency,Drive to eliminate Acoustic Resonance and stroboscopic
Soft start, reduce the demand for power supply, anti-surge
The input power factor is higher than 0.98, the total harmonic of current is less than 10%.
Short circuit protection, open circuit protection, abnormal high temperature protection, lamp life end protection, input voltage protection
Design life of 48000 hours
Waterproof grade IP65

Technical parameter


 

 

Input

Voltage range

300V-460V

Voltage frequency

47~63Hz

Currenton (MAX)

3A

Power factor PFC:

>0.98

Total current harmonic THD:

<7%

Productiveness(220V)

92%

Surge current (220V)

4.68A

Leakage current

0.5mA at 265VAC 50Hz

 

Outlet

Output frequency

100KHz

Starting current

5A

Lamp current peak ratio

<1.7

starting voltage

4.8KV

 

 

Dimming mode

0-10V dimming

2.5V-6V=>60%; 6V-10V=>60%-100%

Lights off voltage

0-2V

Light voltage

2.5V-10V

 

485 dimming

Develop communication protocols according to customer requirements

Timing dimming

Customized according to customer's requirements

 

 

 

Protected mode

 

Open circuit protection

While Open circuit ,start every 1 minute, 30 times after thorough protection

 

Short-circuit protection

Test every 1 minute during short circuit, then protect thoroughly after four times

 

High temperature protect ion

Active power reduction when temperature of internal ballast is greater than 105 °C (see temperature protection curve)

 

Input voltage protection

When the input voltage is lower than 300V ACthe light is turned off, which is higher than that of 310VAC. 300VAC-360VAC actively reduces the power (see the input voltage protection curve).

 

Environment

Working temperature

-25°C to +60°C

Waterproof grade

IP65

 

Vibrate

10-55HZ,2G 12min/cycle,period for 72min each along X Y Z axes

 

Safe

Safety standards

EN61347-2-12

EMC

GB/T 17743-2007 GB 17625.1-2012

 

Else

Electrical life

>48000hrs@TC=75°C at 100% load conditions

Complete volume

642mm*255mm*140mm (L*W*H)

Weight (set):

4KG


Company Features
1. HICOOL, being an industry leader in inline duct exhaust fan pays attention to the passion, and an understanding of customers. HICOOL has a complete product manufacturing and processing system.
2. HICOOL accomplishes great achievement the high quality of the grow room climate controller.
3. The co2 system is a leader in this similar market. The HICOOL plant is in accordance with the requirements of IS09001 quality system.
Without cutting edge technology, co2 system can't be so warmly welcomed in market. It has been enlarged and widened to prevent leakage
The design for co2 system is so important that we will never neglect it. This product provides the absolute tension-free comfort
This kind of grow room climate controller is characteristic of grow room climate controller. This product has the advantage of quick absorption
co2 system are likely to possess features likeinline duct exhaust fan. Its velcro design makes it easy to adjust
The whole installation process for our grow room climate controller needs no any technical tips. The color of this product can be customized according to needs
The product has very good resistance to abrasion. It is able to withstand the friction when it comes into physical contact like repeated impacts, scuffing, scraping, sliding and grinding, among other motions. The product has been certified under CE, SGS, and FDA
Product Message
Chat Online
Chat Online
Chat Online inputting...
Sign in with: